Posts Tagged ‘Isco sampler maintenance’
Don’t Forget Your Calibration
Calibration of permitted outfall equipment is a requirement on most NPDES permits today and can prove to be valuable documentation when the regulatory agents come visit. C.C. Lynch provides flow meter, sampler, and parameter equipment (i.e. pH, DO, Turb, etc) calibrations onsite and will provide the necessary documentation to satisfy regulatory agencies.
Read MoreTeledyne Isco 2150 Flow Meter Found After Hurricane Isaac
For several years the Louisiana Coastal Protection and Restoration Authority has utilized 3 Teledyne Isco 2150 Area Velocity Flow Meters to monitor freshwater flow into Coastal marshes. The Caernarvon Freshwater Diversion Project takes sediment laden freshwater from the Mississippi River and allows it to flow into the marsh providing nutrients and sediment needed to restore…
Read MoreExtend the Life of Your Refrigerated Sampler
The FR series refrigerated samplers by Isco are designed for long life in harsh outdoor environments. The UV protected fiberglass outer shell and powder coated metal components make the FR the perfect selection for all outdoor applications. Most FR units easily last 10 years, but there are few things that you can do to extend the life…
Read MoreTeledyne Isco Automatic Sampler Pump Tubing Maintenance
Changing pump tubing is a periodic maintenance item for Isco Automatic Samplers. The need for pump tubing replacement varies with the frequency of sampling, the suction line length, purge intervals, rinse cycles and the model of sampler.
Read MoreIs Your Instrument Dry??? The Importance of Desiccant Maintenance
It is summer time and hot and humid conditions are upon us. Now is a good time to check and make sure your instruments are equipped with the proper desiccant. For equipment with vented level sensors, the desiccant prevents moisture from getting into the vent tube that provides a reference to atmospheric pressure. Failure to…
Read More